Input Files

The following section describes the input files required by DRAGEN Array. Product files (anything other than the IDATs) can be found on the support site.

IDAT Files

For each sample a pair of raw intensity files (.idat) are generated from the iScan System or NextSeq550 (for select arrays). They provide intensities in the red and green channels for each probe on the Infinium array. More information on which arrays can be used with NextSeq550, can be found on the Illumina Knowledge page on NextSeq550.

An IDAT file is identified by the BeadChip Barcode (12-digit unique Sentrix ID, i.e. 123456789101), BeadChip Position (row and column of the sample, i.e. R01C01), and Grn (Green) or Red for the specific channel.

Manifest Files

The CSV and BPM manifest files can be found on the Illumina Support Site for all commercial Infinium BeadChips or on MyIllumina for custom and semi-custom designs. DRAGEN Array only supports manifest files from the Illumina Support site. For instructions on obtaining manifest files from MyIllumina, see Illumina Knowledge article, How to access custom array product files (manifest and product definition files) in MyIllumina.

The CSV manifest file (.csv) provides complementary data to the BPM manifest file in a human readable format. It is a required input to the genotype gtc-to-vcf command to enable VCF generation for insertion/deletion variants. gtc-to-vcf depends on the presence of accurate mapping information within the manifest, and may produce inaccurate results if the mapping information is incorrect. Mapping information follows the implicit dbSNP standard, where

  • Positions are reported with 1-based indexing.

  • Positions in the PAR are reported with mapping position to the X chromosome.

  • For an insertion relative to the reference, the position of the base immediately 5' to the insertion (on the plus strand) is given.

  • For a deletion relative to the reference, the position of the most 5' deleted based (on the plus strand) is given.

Cluster File

The cluster file (.egt) is a standard product file provided by Illumina for commercial genotyping products and it is a required input for the genotype call command in DRAGEN Array. Custom cluster files may be required for optimal genotyping performance. See section Optimizing cluster files and copy number models for additional details.

CN Model File

The CN (Copy Number) model file (.dat) is a required input to the copy-number call command to enable accurate copy number calling for pharmacogenomics. Illumina provides a standard CN model file for each PGx array product. See section Optimizing cluster files and copy number models for additional details.

Mask File

The mask file (.msk) is a required input to the copy-number train command to enable accurate copy number training for pharmacogenomics. It does not need to be provided as an explicit input to the command line interface but should reside in the same folder as the BPM manifest. It should have the same base name as the manifest for the product. Illumina provides a mask file for each PGx array product and these can be found on the product files support page.

PGx Database File

The PGx database file (.zip) contains the variant mapping information from Infinium PGx arrays to PGx variants. For each gene and each variant used in the star allele definitions of the gene, there is a mapping to the ID field in the SNV VCF file. Each line in the gene mapping file represents a single variant and contains the SNV VCF ID for that variant followed by the HGVS (Human Genome Variation Society) tag for the variant. The PGx database file is array specific and is one of the product files provided by Illumina for each PGx array product.

Genome FASTA Files

The genome FASTA file (.fa) is a text file with the reference genome sequences.The FASTA index file (.fai) contains metadata about chromosomal orchestration within the FASTA file for a particular species. DRAGEN Array PGx calling supports human genome build 37 and 38. The genome FASTA file and FASTA index file are both provided by Illumina for human species and should be stored together in the same input folder. For custom reference genomes, the contig identifiers in the provided genome FASTA file must match exactly the chromosome identifiers specified in the provided manifest. For a standard human product manifest, this means that the contig headers should read ">1" rather than ">chr1".

IDAT Sample Sheet

For local analysis, the IDAT sample sheet can be a CSV or JSON formatted file with direct paths to sample IDAT files. It enables easy analysis of samples from different directories.

Example CSV format:

Green IDAT Path,Red IDAT Path

/path/to/sample1_Grn.idat,/path/to/sample1_Red.idat

/path/to/sample2_Grn.idat,/path/to/sample2_Red.idat

/path/to/sample3_Grn.idat,/path/to/sample3_Red.idat

Example JSON format:

[

{

"Green IDAT Path": "/path/to/sample1_Grn.idat",

"Red IDAT Path": "/path/to/sample1_Red.idat"

},

{

"Green IDAT Path": "/path/to/sample2_Grn.idat",

"Red IDAT Path": "/path/to/sample2_Red.idat"

},

{

"Green IDAT Path": "/path/to/sample3_Grn.idat",

"Red IDAT Path": "/path/to/sample3_Red.idat"

},

]

For cloud analysis, the IDAT sample sheet can be a CSV formatted file.

beadChipName,sampleSectionName

Beadchip 1 barcode (204753010023), sample section (R01C01)

Beadchip 1 barcode (204753010023), sample section (R02C01)

Beadchip 2 barcode (204753010024), sample section (R01C01)

Beadchip 2 barcode (204753010024), sample section (R02C01)

For DRAGEN Array Methylation QC on cloud, additional optional sample sheet fields are available.

Following Sample_Group, any number of additional columns can be added to include meta data fields such as sex, sample type, plate and well information, etc. Additional columns added after the Sample_Group column may have user-defined column header values. The Sample_ID field and any additional metadata added will be replicated in the Sample QC Summary output files.

The Sample_Group field will be used to populate the PCA Control Plot within the Sample QC Summary Plots file and the Principal Component Summary file. For the PCA Control Plot, each sample group will be assigned a unique color. Samples assigned to the same Sample_Group value will be the same color in the PCA Control Plot.

beadChipName,sampleSectionName,Sample_ID,Sample_Group,MetaData1

Beadchip 1 barcode (204753010023), sample section (R01C01),NA1231,Group1,F

Beadchip 1 barcode (204753010023), sample section (R02C01),NA1232,Group2,F

Beadchip 2 barcode (204753010024), sample section (R01C01),NA1233,Group2,M

Beadchip 2 barcode (204753010024), sample section (R02C01),NA1234,Group1,M

GTC Sample Sheet

The GTC sample sheet is a CSV or JSON formatted file with direct paths to sample GTC files. It enables easy analysis of samples from different directories.

Example CSV format:

GTC Path

/path/to/sample1.gtc

/path/to/sample2.gtc

/path/to/sample3.gtc

Example JSON format:

[

{

"GTC Path": "/path/to/sample1.gtc"

},

{

"GTC Path": "/path/to/sample2.gtc"

},

{

"GTC Path": "/path/to/sample3.gtc"

}

]

Input File Summary Table

In addition to the input files, there are set of intermediate files, including GTC, SNV VCF, CNV VCF and PGx CSV, which are outputs of some DRAGEN Array Local commands and inputs to other commands.

The table below summarizes the input files or intermediate file, their sources, and the associated DRAGEN Array Local commands and options.

Input FileSourceCommandOption

IDAT

User provided from scanning instrument

genotype call

--idat-folder

CSV Manifest

Product file from Illumina

genotype gtc-to-vcf

--csv-manifest

BPM Manifest

Product file from Illumina

copy-number train

genotype call

genotype gtc-to-bedgraph

genotype gtc-to-vcf

--bpm-manifest

Cluster File

Product file from Illumina or user created using GenomeStudio

genotype call

--cluster-file

CN Model

Product file from Illumina or user created using DRAGEN Array Local

copy-number call

--cn-model

PGx Database

Product file from Illumina

star-allele call

--database

Genome FASTA

Product file from Illumina

genotype gtc-to-vcf

copy-number train

--genome-fasta-file

IDAT Sample Sheet

User provided

genotype call

--idat-sample-sheet

GTC Sample Sheet

User provided

genotype gtc-to-bedgraph

genotype gtc-to-vcf

copy-number call

copy-number train

--gtc-sample-sheet

GTC

DRAGEN Array output from genotype call

genotype gtc-to-bedgraph

genotype gtc-to-vcf

copy-number call

copy-number train

--gtc-folder

SNV and CNV VCF

DRAGEN Array output from genotype gtc-to-vcf and copy-number call

star-allele call

--vcf-folder

PGx CSV

DRAGEN Array output from star-allele call

star-allele annotate

--star-alleles

Last updated

For Research Use Only. Not for use in diagnostic procedures. © 2024 Illumina, Inc. All rights reserved.